from abaqusConstants import *
from .GeometricRestriction import GeometricRestriction
from ..Region.Region import Region
[docs]class DrillControl(GeometricRestriction):
"""The DrillControl object defines a drill control geometric restriction.
The DrillControl object is derived from the GeometricRestriction object.
Notes
-----
This object can be accessed by:
.. code-block:: python
import optimization
mdb.models[name].optimizationTasks[name].geometricRestrictions[name]
"""
def __init__(self, name: str, clientDirection: tuple, region: Region, csys: int = None,
drawAngle: float = 0, mainPoint: str = None,
mainPointDetermination: SymbolicConstant = MAXIMUM,
presumeFeasibleRegionAtStart: Boolean = ON, tolerance1: float = 0,
tolerance2: float = 0, tolerance3: float = 0, undercutTolerance: float = 0):
"""This method creates a DrillControl object.
Notes
-----
This function can be accessed by:
.. code-block:: python
mdb.models[name].optimizationTasks[name].DrillControl
Parameters
----------
name
A String specifying the geometric restriction repository key.
clientDirection
A VertexArray object of length 2 specifying the direction of the drill axis positioned
at the *csys* origin. Instead of through a ConstrainedSketchVertex, each point may be specified through a
tuple of coordinates.
region
A Region object specifying the region to which the geometric restriction is applied.
When used with a TopologyTask, there is no default value. When used with a ShapeTask,
the default value is MODEL.
csys
None or a DatumCsys object specifying the local coordinate system. If *csys*=None, the
global coordinate system is used. When this member is queried, it returns an Int. The
default value is None.
drawAngle
A Float specifying the draw angle. The default value is 0.0.
mainPoint
None or a Region object specifying the main point used when *mainPointDetermination* is
SPECIFY. The default value is None.
mainPointDetermination
A SymbolicConstant specifying the rule for assigning point priority. Possible values are
MAXIMUM, MINIMUM, and SPECIFY. The default value is MAXIMUM.
presumeFeasibleRegionAtStart
A Boolean specifying whether to ignore the geometric restriction in the first design
cycle. The default value is ON.
tolerance1
A Float specifying the geometric tolerance in the 1-direction. The default value is
0.01.
tolerance2
A Float specifying the geometric tolerance in the 2-direction. The default value is
0.01.
tolerance3
A Float specifying the geometric tolerance in the 3-direction. The default value is
0.01.
undercutTolerance
A Float specifying the undercut tolerance. The default value is 0.0.
Returns
-------
A DrillControl object.
"""
super().__init__()
pass
[docs] def setValues(self, csys: int = None, drawAngle: float = 0, mainPoint: str = None,
mainPointDetermination: SymbolicConstant = MAXIMUM,
presumeFeasibleRegionAtStart: Boolean = ON, tolerance1: float = 0,
tolerance2: float = 0, tolerance3: float = 0, undercutTolerance: float = 0):
"""This method modifies the DrillControl object.
Parameters
----------
csys
None or a DatumCsys object specifying the local coordinate system. If *csys*=None, the
global coordinate system is used. When this member is queried, it returns an Int. The
default value is None.
drawAngle
A Float specifying the draw angle. The default value is 0.0.
mainPoint
None or a Region object specifying the main point used when *mainPointDetermination* is
SPECIFY. The default value is None.
mainPointDetermination
A SymbolicConstant specifying the rule for assigning point priority. Possible values are
MAXIMUM, MINIMUM, and SPECIFY. The default value is MAXIMUM.
presumeFeasibleRegionAtStart
A Boolean specifying whether to ignore the geometric restriction in the first design
cycle. The default value is ON.
tolerance1
A Float specifying the geometric tolerance in the 1-direction. The default value is
0.01.
tolerance2
A Float specifying the geometric tolerance in the 2-direction. The default value is
0.01.
tolerance3
A Float specifying the geometric tolerance in the 3-direction. The default value is
0.01.
undercutTolerance
A Float specifying the undercut tolerance. The default value is 0.0.
"""
pass