from abaqusConstants import *
from .GeometricRestriction import GeometricRestriction
from ..Region.Region import Region
[docs]class ShapeDemoldControl(GeometricRestriction):
"""The ShapeDemoldControl object defines a shape demold control geometric restriction.
The ShapeDemoldControl object is derived from the GeometricRestriction object.
Notes
-----
This object can be accessed by:
.. code-block:: python
import optimization
mdb.models[name].optimizationTasks[name].geometricRestrictions[name]
"""
def __init__(self, name: str, pullDirection: tuple, region: Region,
collisionCheckRegion: SymbolicConstant = DEMOLD_REGION, csys: int = None,
drawAngle: float = 0, mainPointDetermination: SymbolicConstant = MAXIMUM,
presumeFeasibleRegionAtStart: Boolean = ON, tolerance1: float = 0,
tolerance2: float = 0, tolerance3: float = 0, undercutTolerance: float = 0):
"""This method creates a ShapeDemoldControl object.
Notes
-----
This function can be accessed by:
.. code-block:: python
mdb.models[name].optimizationTasks[name].ShapeDemoldControl
Parameters
----------
name
A String specifying the geometric restriction repository key.
pullDirection
A VertexArray object of length 2 specifying the demold pull direction. Instead of
through a ConstrainedSketchVertex, each point might be specified through a tuple of coordinates.
region
A Region object specifying the region to which the geometric restriction is applied.
When used with a TopologyTask, there is no default value. When used with a ShapeTask,
the default value is MODEL.
collisionCheckRegion
The SymbolicConstant DEMOLD_REGION or a Region object specifying the collision check
region. If the value is DEMOLD_REGION, then the value of *region* is used as both the
demold region and the collision check region. The default value is DEMOLD_REGION.
csys
None or a DatumCsys object specifying the local coordinate system of the
*pullDirection*. If *csys*=None, the global coordinate system is used. When this member
is queried, it returns an Int indicating the identifier of the DatumCsys. The default
value is None.
drawAngle
A Float specifying the draw angle. The default value is 0.0.
mainPointDetermination
A SymbolicConstant specifying the rule for assigning point priority. Possible values are
MAXIMUM and MINIMUM. The default value is MAXIMUM.
presumeFeasibleRegionAtStart
A Boolean specifying whether to ignore the geometric restriction in the first design
cycle. The default value is ON.
tolerance1
A Float specifying the geometric tolerance in the 1-direction. The default value is
0.01.
tolerance2
A Float specifying the geometric tolerance in the 2-direction. The default value is
0.01.
tolerance3
A Float specifying the geometric tolerance in the 3-direction. The default value is
0.01.
undercutTolerance
A Float specifying the undercut tolerance. The default value is 0.0.
Returns
-------
A ShapeDemoldControl object.
"""
super().__init__()
pass
[docs] def setValues(self, collisionCheckRegion: SymbolicConstant = DEMOLD_REGION, csys: int = None,
drawAngle: float = 0, mainPointDetermination: SymbolicConstant = MAXIMUM,
presumeFeasibleRegionAtStart: Boolean = ON, tolerance1: float = 0,
tolerance2: float = 0, tolerance3: float = 0, undercutTolerance: float = 0):
"""This method modifies the ShapeDemoldControl object.
Parameters
----------
collisionCheckRegion
The SymbolicConstant DEMOLD_REGION or a Region object specifying the collision check
region. If the value is DEMOLD_REGION, then the value of *region* is used as both the
demold region and the collision check region. The default value is DEMOLD_REGION.
csys
None or a DatumCsys object specifying the local coordinate system of the
*pullDirection*. If *csys*=None, the global coordinate system is used. When this member
is queried, it returns an Int indicating the identifier of the DatumCsys. The default
value is None.
drawAngle
A Float specifying the draw angle. The default value is 0.0.
mainPointDetermination
A SymbolicConstant specifying the rule for assigning point priority. Possible values are
MAXIMUM and MINIMUM. The default value is MAXIMUM.
presumeFeasibleRegionAtStart
A Boolean specifying whether to ignore the geometric restriction in the first design
cycle. The default value is ON.
tolerance1
A Float specifying the geometric tolerance in the 1-direction. The default value is
0.01.
tolerance2
A Float specifying the geometric tolerance in the 2-direction. The default value is
0.01.
tolerance3
A Float specifying the geometric tolerance in the 3-direction. The default value is
0.01.
undercutTolerance
A Float specifying the undercut tolerance. The default value is 0.0.
"""
pass